Related Manuals for Samsung DSB-9401F
Summary of Contents for Samsung DSB-9401F
- Page 1 DSR 9401 FTA / DSB-9401F / DSB-9401V Instructions for use DIGITAL SATELLITE RECEIVER...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY AC 100~240V 50/60Hz OVERLOADING Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS Keep liquids away from the STB. -
Page 3: Table Of Contents
CONTENT Safety Instructions ........1 General Features . -
Page 4: Connecting Your "Stb
CONNECTING YOUR "STB" 1. LOCATION OF THE RECEIVER Your STB should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. -
Page 5: Description
DESCRIPTION Front Panel 1. LED Display When the LED light Red, the set-top box enters the standby mode. When the LED light Green, it enters the operation mode. 2. Card Slot 1 Slot for Viaccess smartcard. (For model DSB-9401V) GB-6 Rear Panel 1. -
Page 6: Remote Control Unit
DESCRIPTION Remote Control Unit N N o o t t e e : When inserting batteries, make sure that the polarity(+/-) is correct. 1. POWER( This is used to switch the receiver ON/STANDBY mode. 2. 0-9 Numerical keys ( These keys are to enter numeric values and to select the channel directly by entering its number. -
Page 7: Basic Functions
BASIC FUNCTIONS 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Left Audio Status Parental Lock Channel Number... - Page 8 BASIC FUNCTIONS 5.1 Service Favorites Press the Green ( ) key on the control unit to select the Favorites list. Use the keys to select a favorite group that you want. Press the Green ( ) key to toggle group and channel list.
-
Page 9: Operating The Receiver
BASIC FUNCTION 8. Teletext OSD When the current broadcasting program provides Teletext OSD, press the Green ( ) key twice to see the current Teletext OSD list. To change the Teletext OSD: Use the keys to select a Teletext OSD you want. -
Page 10: Lnb Setting
OPERATING THE RECEIVER 1.1 LNB Setting You can select the satellite and LNB setting conditions to execute channel search and you can alter the settings for 22KHz tone. The parameters set in this menu are needed for programming the channels for the "Auto scanning"... -
Page 11: Installer Mode
OPERATING THE RECEIVER 1.2.2 Installer Mode After checking the positioner’s state, installer should use this menu. He should set the “Disable Limits” before using User mode. Select the Drive Motor West/East and use the keys to drive motor. key drives to west and key drives to east. -
Page 12: Smatv Scanning
OPERATING THE RECEIVER Select the FEC(Forward Error Correction)of the transponder you want to find. You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto. Select the polarization of the transponder you want to find. (Horizontal/Vertical/Circular Left/Circular Right) In the case of horizontal, 18V and in the case of vertical, 13V are output through LNB line. -
Page 13: Delete Channel
OPERATING THE RECEIVER 2.3 Delete Channel Select the desired channel you want to delete by pressing Red ( ) key. Press key for confirmation. 2.4 Delete All Channels At the request window, press key to delete all channels and press MENU / EXIT to exit. 2.5 Delete Scrambled Channels At the request window, press key to delete... -
Page 14: Parental Lock
OPERATING THE RECEIVER 3. Parental Lock This "Parental Lock" feature sets viewing restrictions and prevents unauthorized access to your STB through the PIN (Personal Identification Number), which is a 4 digit number. (The factory preset PIN Code : 0000) On selecting this menu, you will have two options: to set lock for any desired channel and to change your PIN value. -
Page 15: System Setup
OPERATING THE RECEIVER 4. System Setup This option enables you to change the factory preset system settings as per your requirements. 4.1. Language Selection The "Language Selection"option allows the user to select the desired language of the OSD, Soundtrack, Teletext, Subtitle or EPG. To accommodate user from different regions speaking different languages, OSD languages are available 19 languages. -
Page 16: System Information
OPERATING THE RECEIVER 4.5 System Information If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press key. The following will be the on-screen display. 4.6 Software Upgrade You can download and upgrade the software of this STB through ASTRA, Sirius and Hotbird satellite when... -
Page 17: Troubleshooting
TROUBLESHOOTING Problem Possible cause Solution of the problem No display LED on Power cord Power cord plug in correctly the front panel; not plugged in correctly Back switch in correctly No power supply No pictures on the screen Receiver in Standby mode; Set receiver to "On";... - Page 18 TECHNICAL SPECIFICATIONS NETWORK INTERFACE (Broadcasting - Digital) Interface One LNB input Front end DVB-S compliant digital satellite receiver (ETS 300 421) FEC Decoder Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 with constraint Length K=7 Input frequency range 950 ~ 2150Mhz 12dB (typical) Input Connector F-type, IEC 169-24, Female...