Delete; Next Day; A Day Before; Channel Scan - Samsung DSB-B350S Instructions For Use Manual

OPERATING THE RECEIVER

2.2.1 Delete

● Select the desired preserved channels using
● Press GREEN(ALT) key, selected programme is deleted in
reserved list.

2.2.2 Next Day

●
Press YELLOW(AUDIO) key to view next day reserved
programme list.
When you press YELLOW(AUDIO) key, the cursor position is
moved first reserved programme position at the next day.

2.2.3 A day before

● Press BLUE( i ) key to view a day before reserved
programme list.
When you press BLUE( i ) key, the cursor position is moved last
reserved programme position at the a day before.

2.3 Channel Scan

This menu will enable download the channels from the
preprogrammed satellites using Automatic Channel Search or
Manual Channel Search. In addition, you can add user satellite,
user TP and change LNB setting condition.
GB-20
/ keys.
D I G I T A L S

2.3.1 LNB Setting

You can select the satellite and LNB setting conditions to
execute channel search and you can alter the settings for
22KHz tone. The parameters set in this menu are needed for
programming the channels for the Automatic Channel Search
and Manual Channel Search.
The necessary information can be found at your antenna and
LNB brochures, or you can ask you dealer.
●
Select the LNB Power supply "ON".
●
Select the desire satellite name.
● Select the LNB Type (frequency).
● Select the DiSEqC Mode. (None, ToneBurst-A, ToneBurst-B, Port1, Port2, Port3, Port4)
● You can use DisEqC1.0, DisEqC1.2 mode.
N N o o t t e e : Before watching the preset channel connecting the DiSEqC, you must choose an
appropriate DiSEqC port.
22Khz : In case you are using a dual LNB or two antennas connected to a 22Khz tone switch box,
with the 22Khz tone switch(On, Off) you can switch between both LNB or antennas.
DiSEqC (Digital Satellite Equipment Control)
A standard through which it is possible to let a DiSEqC
compatible receiver send a signal over the RF cable to a
switching device to switch between different LNBs or dishes.
The DiSEqC uses the 22KHz signal to control the switching
device.
●
If you have DiSEqC box, you can choose port by selection
portnumber. Otherwise choose "None".
●
In case DiSEqC mode, you must know the DiSEqC mode
to receive signal from satellite you want. If you select port1,
receiver is get signal through DiSEqC box port 1. When
you select wrong DiSEqC mode, receiver can't get signal
from your desired satellite.
A T E L L I T E R E C E I
OPERATING THE RECEIVER
V E R GB-21