Paper Specifications; Paper Output Capacity - Samsung SF-560R User Manual

Symptom
Jamming, damage to
machine
Problems with feeding
N
:
OTES
• Do not use letterhead paper printed with low-temperature inks, such as those used in
some types of thermography.
• Do not use raised or embossed letterhead.
• The machine uses heat and pressure to fuse toner to the paper. Insure that any colored
paper or preprinted forms use inks that are compatible with this fusing temperature
(200 °C or 392 °F for 0.1 second).

Paper Specifications

Category
Acid Content
Caliper
Curl in Ream
Cut Edge Conditions
Fusing Compatibility
Grain
Moisture Content
Smoothness

Paper Output Capacity

Output Location
Face-down output tray
Face-up output slot
A.8
Problem with Paper
Cutouts or perforations
Ragged edges
5.5 pH or lower
0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Flat within 5 mm (0.02 in.)
Cut with sharp blades with no visible fray.
Must not scorch, melt, offset or release hazardous
emissions when heated to 200 °C (392 °F) for 0.1
second.
Long Grain
4 % ~ 6 % by weight
100 ~ 400 Sheffied
150 sheets of 75 g/m
1 sheet of 75 g/m
Do not use paper with cutouts or
perforations.
Use good quality paper.
Specifications
Capacity
2
bond (20 lb) paper
2
bond (20 lb) paper
Solution