Page 2
Car Dashboard Removal We will providecar dashboard removal videos for different kinds of car model. Please scan below QR code to view the guidance videos for your reference.
Page 3
1.Functional Statement CarPlay Autolink Android Auto AirPlay Bluetooth Rear Camera CarPlay / Android Auto The built-in vehicle machine interaction system of iPhone cooperates with the central control knob button to provide voice command and control of phone, information, navigation, music, to operate Siri voice interaction to obtain more information;...
Page 7
3.2 LProduct Installation (8816) Remove the screws and then remove the air conditioning panel, e.g., P1-P2-P3 LVDS cable connects to original radio interface Transfer the fiber optic cable to here Convert original car LVDS cable Convert original car power cable Transferring the original fiber optic cable to the product's power cable...
Page 8
4 PCB/Ribbon Cable Connections ( 8814) Attention: 1, other cable connection can refer to 8816 2, no need to change the original LVDS cable...
Page 9
4 Original car button description: Up-and-down curve volume +- Press and hold toswitch the system Knob operation,press to enter Left and right knobs Tap NTER and hold SIRI volume up or down,short press pause Previous Song Next song Press and hold toswitch the system...
Page 10
5.Wireless CarPlay Connection Step 1 Step 2 Check the Bluetooth Device name Select “Bluetooth” as “CAR-xxxx” Step 3 Step 4 Select Bluetooth Device name as Turn on WlFl and keep it on, then “CAR-XXX” -Pair-Use CarPlay back to Bluetooth to connect CarPlay while that pop up a request window...
Page 11
6. Wireless Airplay Connection Step 1 Step 2 Turn on the phone, select the Select “Bluetooth” Wireless LAN option, the searchbar will show the “CAR-WIFI-XXX” and click the link, the password is 66668888 Step 3 Step 4 After the WiFi connection is successful, After the mobile phone return to the main interface of phone, “Screen Mirroring”...
Page 12
7. Wireless Android Auto Connection Step 1 Step 2 Check the Bluetooth name starting Select “Bluetooth” with “CAR-xxx” in the Bluetooth interface Step 3 Step 4 Click the Bluetooth name at the Click on the Bluetooth name beginning beginning of “CAR-xxx ” and click with “CAR-xxx”...
Page 13
8. Wireless AutoLink Connection Step 1 Step 2 Android phone scan and download Switch the WIFl Auto Link to ‘N0” the Auto Link by using the Browser in the settings page Step 3 Step 4 Open the Auto link software you The media sound of AutoLink need to connect with Bluetooth.
9. Audio Settings Call Echo Cancellation steps: Settings-Audio-AEC Delay,then click the button “Start Auto AECIf there is an echo when in phone call. Please click this button for echo correction. Whencorrecting the echo, we must : 1. Keep quiet in the car; 2.
Page 15
10 Audio connection settings 10.1 Bluetooth audio connection: Please check if the original car has Bluetooth music. If there is no Bluetooth music, please use AUX audio. Step 1: Open the Bluetooth in the setting interface to return to the original car interface Step 2: Select Bluetooth in the original car “Media”...
Page 16
11 Audio connection settings 11.2 AUX audio Connections: Step1: In the module interface, turn off “Use original Bluetooth” . Step2: In the original car interface - Media - AUX Please note that 1: Bluetooth audio and AUX audio cannot be used at the same time. 2: Bluetooth audio can be used with the original microphone, AUX audio may not support the original microphone.
Page 17
12 Reversing camera connecting and setting In the module settings select: Original camera and aftermarket camera (P1 P2) Aftermarket camera connection is as follows: Please connect the 12V camera power (red cable) (P3 ) please connect the yellow RCA rear camera video connector(P3 ) No connection required If it still can't work properly, please try to change the CVBS signal mode in the module in car settings - reverse settings - change the CVBS signal mode.(P4)
13 System firmware upgrade Note: We do not recommend that you upgrade if you are using it normally. If you encounter problems during the use of the product (which can be solved by updating the firmware), then you can contact online customer service to request a firmware update.then you can contact online customer service to ask for firmware update.
Need help?
Do you have a question about the VLV8816 and is the answer not in the manual?
Questions and answers