CenterLine VeriFast MicroView 4.0 User Manual page 5

Equipment Overview
Intended Use of Equipment
The VeriFast™ MicroView 4.0 (also referred to as "MicroView 4.0") is a process monitor that allows the
simple integration of analog linear position sensing devices into resistance welding systems that require
Ethernet/IP communication. A maximum of 2 analog devices can be connected to and monitored by the
MicroView 4.0 at a time. The MicroView 4.0 can be configured either from the integrated CLCS HMI
display(s), or from a browser via Wi-Fi/Ethernet.
Equipment Configuration
The MicroView 4.0 consists of 2 primary components:
• Process Monitor
• CLCS HMI. Note: A secondary CLCS HMI is optional.
VeriFast™ MicroView 4.0 – User Manual – Ver. 2.1
Ethernet/IP
Communication
Device 1 Port
CLCS HMI 1 Port
USB Ports
Power IN
(24 V)
CLCS HMI
Figure 1 – Configuration of VeriFast™ MicroView 4.0
Port for Future Feature
Device 2 Port
CLCS HMI 2 Port
Power OUT
(24 V)
Process Monitor
CLCS HMI
(Secondary, Optional)
5