CenterLine VeriFast MicroView 4.0 User Manual page 2

Contact Information
Head Office:
CenterLine (Windsor) Limited
415 Morton Drive
Windsor ON N9J 3T8
Canada
CAN. 519.734.8464
U.S. 313.962.1448
Toll Free: 800.820.6977
E-mail: info@cntrline.com
www.cntrline.com
For additional contact information, visit our website at
Disclaimer
This manual is provided for informational purposes only. Those responsible for the application and use of this product are
responsible for ensuring that the product meets all applicable laws, regulation codes, and standards. CenterLine (Windsor)
Limited does not, by the publication of this document, intend to urge action that is not in compliance with applicable laws, and
this document may not be construed as doing so. CenterLine (Windsor) Limited has made every effort to ensure the accuracy
and completeness of this document; however, because ongoing efforts are made to continually improve the capabilities of our
products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or
future changes herein.
In no event will CenterLine (Windsor) Limited be responsible or liable to any party for any personal injury, property or other
damages of any nature whatsoever, whether special, direct, indirect, incidental, consequential or compensatory, directly or
indirectly resulting from the publication, use of, or reliance on this document, and also from the use of the equipment described
herein.
In issuing and making this document available, CenterLine (Windsor) Limited is not undertaking to render professional or other
services for or on behalf of any person or entity. Nor is CenterLine (Windsor) Limited undertaking to perform any duty owed by
any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as
appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given
circumstances.
The illustrations, explanations, charts, and layout examples shown in this publication are intended solely for purposes of
example. Since there are many variables and requirements associated with any particular installation, CenterLine (Windsor)
Limited does not assume responsibility of liability (including intellectual property liability) for actual use based upon the
information given in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part, without written permission of CenterLine
(Windsor) Limited, is prohibited.
© Copyright 2024, CenterLine (Windsor) Ltd. All rights reserved.
2
VeriFast™ MicroView 4.0 – User Manual – Ver. 2.1