enphase IQ System Controller 3M Quick Install Manual page 9

Tools/additional items required
S . N O I T E M N A M E
1 CT-200-CLAMP or CT-200-SPLIT
2 IQ Meter Collar
3 EP200G-HNDL-R1 (lifting handle)
4 Breakers, different ratings
5 Conduits (with fittings and fitting tools)
6 Drill
7 5/32" pilot bit
8 Screwdriver
9 Wrench
10 Adjustable wrench
11 Torque wrench
12 Level tool
13 5/32" Allen key
14 Conductor stripper
15 Electrician's hole saw (2") or punch set
16 Stud finder (if required)
17 Conduit ground hub rings
#10,1/4" or 5/16" lag bolts or screw 3" long (depending
18
on attaching wall) for each wall-mount bracket
19 Control wire
** Enphase SKU for control cable: CTRL-SC3-NA-01
WARNING: Do not use power tools for electrical connections.
IQ System Controller 3M quick install guide
Q U A N T I T Y S O U R C E
Included with IQ Combiner
3
and/or COMMS-KIT-02
1 Enphase store
1 Enphase Store
4 Enphase Store/retail outlets
As required Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
1 Provided by installer
As required Provided by installer
As required Distribution/Enphase Store**
9