PRECISION FILTERS 28000-5-TEST Installation Instructions Manual page 19

2 28000-5-TEST Installation
2.1 Introduction
This section provides site preparation and installation instructions for the 28000-5-TEST test
system.
Before installing the test system, refer to the System 28000 Operation and Maintenance
Instructions manual to ensure that the 28000 system is correctly installed.
Be sure to read and understand the documentation included with the Keysight 33509B
waveform generator and the Keysight 34465A digital multimeter before using these products.
2.2 Site Preparation
This section summarizes the preparations that must be made before the test system
components are installed.
2.2.1 Power Requirements
Refer to the vendor documentation accompanying the Keysight 33509B waveform generator
and the Keysight 34465A digital multimeter for the current power requirement information.
Keysight 33509B Waveform Generator
• Voltage:
• Power consumption: < 45 W, < 130 VA
Keysight 34465A Digital Multimeter
• Voltage:
• Frequency:
• Power consumption: 25 VA
Precision Filters, Inc.
100 V to 240 V 50/60 Hz (–5%, +10%)
100 V to 120 V 4000 Hz ±10%
100/120 (127)/ 220 (230)/240 ACV ± 10%, CAT II
10/60/400 Hz ±10%
28000-5-TEST Installation
28000-5-TEST Installation Instructions
Page 13
Rev. B