Roland UM-3EX Owner's Manual page 29

11. Click Test Setup.
The shape of the mouse cursor changes
fig.osx-10e.eps
12. Click the area shown in the illustration. If the corresponding MIDI OUT indicator of the UM-3EX
blinks, the settings are correct.
13. Click Test Setup and complete the confirmation.
14. Close the Audio MIDI Setup dialog box.
When using the UM-3EX with your sequencer software
Before using the UM-3EX with your sequencer software, please note the following points.
• Connect the UM-3EX to your Macintosh before you start up your sequencer software.
• Do not disconnect the UM-3EX from your Macintosh while your sequencer software is running.
Quit your sequencer software before you disconnect the UM-3EX from your Macintosh.
• The UM-3EX will not operate in the Mac OS X Classic environment. Use the UM-3EX when the
Classic environment is not running.
.
12
Click the icon
11, 13
Test Setup
29