Performing With The Loop Mix Function; Playing Patterns According To The Chord You Play (Interactive Chord) - Roland GO:KEYS Owner's Manual

Performing with the Loop Mix Function

Loop mix is a function that lets you play patterns (accompaniment tones or
drum tones) by pressing notes on the keyboard.
Patterns for each tone part are assigned to five areas of the keyboard. These
five areas are collectively called a "loop mix set. "
One pattern can be played in each area; patterns are two measures long, and
play back repeatedly (as a loop).
In every loop mix set, a drum pattern is assigned to area 1 and a bass pattern
is assigned to area 2.
This instrument lets you enjoy performing with loop mix sets that cover a
wide variety of musical genres.
* The song function and the loop mix function can't be used at the same time.
MEMO
5 You can change the tempo of the pattern (p. 8).
5 Only in area 5, you can play patterns with multiple tone parameters. You can also press multiple keys at the same time to play them
simultaneously.
5 For details on the loop mix sets and patterns, refer to "Loop Mix Set List" at the end of this manual.
Here we explain the procedure for performing a bass tone while sounding a drum tone.
1 5
3 4
Selecting a loop mix set
1
Press the [LOOP MIX] button to turn the loop mix function on ("
If you press the [LOOP MIX] button while a song is loaded, the display indicates "CLEAR SONG?"
If you want to use the loop mix function, press the [ENTER] button to clear the song. You can recall the cleared song by loading it again (p. 7).
2
Use the [–] [+] buttons to select the loop mix set that you want.
Playing a drum part pattern
3
Press one of the keys in area 1.
A drum tone pattern sounds.
During playback: blinking "
1 2
3
Area
Playing a bass part pattern
4
Press keys in area 2 one at a time.
A bass tone pattern sounds.
If you want to add more parts to the playback, press keys in each of the other areas.
5
Press the [LOOP MIX] button to return to the normal performance state ("
To stop the pattern, press the [s] button.

Playing Patterns According to the Chord You Play (Interactive Chord)

While the loop mix function is playing patterns, you can use the interactive chord function to vary the patterns according to the chords
that you play.
For more about the interactive chord function, refer to "Sounding Patterns According to the Chord You Play (Interactive Chord)" (p. 3).
2
"
4 5
1 2
Drum Bass
pattern pattern
" is lit).
To stop the patterns
Press the right-most key of the area whose pattern
you want to stop.
To stop one
pattern
Press the [s] button.
To stop all
If you press the [s] button once again, the
patterns
patterns play in the previous state.
Area
3 4 5
Set of five areas
Loop mix set
" is unlit).
5