Ricoh IS200E Operating Instructions Manual page 64

Image scanner
Hide thumbs Also See for IS200E:
Table of Contents

Advertisement

Configuring the Scanner Settings
D D D D
Select the option you want among
"Select: Send/Print", "Send Scan"
and "Print Scan".
• The option that is currently se-
lected is displayed first.
• "*" mark appears along with the
3
option currently selected
• Use [↑ ↑ ↑ ↑ ] and [↓ ↓ ↓ ↓ ] to display the
option you want to select.
E E E E
While the option you want to se-
lect is displayed, press [OK].
This saves the setting you have
configured, and returns to the Sys-
tem Settings menu.
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
the previous screen.
F F F F
Configure the necessary settings
in accordance with your network
environment.
To configure network boot and
related settings when a fixed IP
address is assigned to this
machine
A Press [↓ ↓ ↓ ↓ Next].
"2. IP Address" appears as the
setup item currently selected.
B Press [Settings].
The setting screen for "2. IP Ad-
dress" appears.
56
C Specify the IP address of this
machine.
• Input the IP address using
the number keys.
• An IP address consists of four
parts, and each part has a
number within the range of 0
to 255. Make sure that you in-
put each part of the IP address
in three digits. For example,
when you want to specify "8"
for a part, highlight the part
and then input "008" using the
number keys.
You can use { { { { 1 1 1 1 } } } } (or { { { { #} } } } )
and { { { { 0 0 0 0 } } } } keys to move the
highlighting to right and left.
Note
❒ You can use the { { { { Clear/Stop} } } }
key to clear the three-digit
number currently highlighted.
D When you are finished, press
[OK].
This returns to the System Set-
tings menu.
Note
❒ Pressing [Cancel] discards the
value that you have speci-
fied, and returns to the previ-
ous screen.
E Press [↓ ↓ ↓ ↓ Next]
"3. Subnet Mask" appears as the
setup item currently selected.
F Specify each value for "3. Sub-
net Mask", "4. Default Gate-
wa y Address" , "5 . A ccess
Control" and "6. Access Mask"
in the same way that you have
done in steps B B B B through E E E E .
"7. Network Boot" appears as the
setup item currently selected.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

402334 - is 200e

Table of Contents