Selecting Color/Black And White - Ricoh IS200E Operating Instructions Manual

To recall all available printers
A Press the { { { { ./*} } } } (Title) key.
List of titles appears on the
screen.
B Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight [All], and then press
[OK].
C C C C
Highlight the printer you want to
select, by using the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } }
key and then press [Select].
This selects the check box next to
the printer name.
Note
❒ Selecting another printer auto-
matically deselects the printer
currently selected (so the check
mark next to the printer is
cleared).
❒ While highlighting a printer
name with its check box select-
ed, press [Clear] to clear the
check box (this deselects the
printer).
D D D D
Press [OK].
This returns to the Print Scan
Ready screen.
Selecting Color/Black and
White
When you perform a Print Scan oper-
ation, you can select between "color"
scanning and "black and white" scan-
ning. If you do not select this setting,
the default setting selected using [Col-
or/Black and White] (in [3.Print Scan Set-
tings] under the Scanner Features
menu) applies.
A A A A
While the Print Scan Ready
s c r e e n i s d i s p l a y e d , p r e s s
[CLR/B&W].
B B B B
Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [Black and White] or [Color] on
the screen.
Note
❒ When the above screen is dis-
played, currently selected op-
tion is highlighted.
C C C C
While the option you want is
highlighted, press [OK].
This returns to the Print Scan
Ready screen.
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
the previous screen.
Printing Scan Data
169
8