Print Scan Operation Error Messages - Ricoh IS200E Operating Instructions Manual

Print Scan operation error messages

Message
Printer is offline.
Check the printer.
[Exit]
The printer is current-
ly in use. Cannot print.
[Exit]
Selected printer is not
supported. Check the
printer.
[Exit]
No response from the de-
vice. Check the power
and cables.
[Exit]
Warming up... Check the
printer.
[Exit]
Add paper to the print-
er.
[Exit]
Add Toner Replace Toner
Bottle in the printer.
[Exit]
Cover Open Check the
printer.
[Exit]
Paper Misfeed Check the
printer.
[Exit]
Functional Problems
Check the printer.
[Exit]
Possible Cause and Required Action
• The printer you have selected for printing is currently
offline. Press the { { { { Online} } } } key on the printer to make it
online. Press [Exit] to start printing.
• The printer is currently in use. Press [Exit] to cancel the
print job (this discards the scan data), and try again lat-
er.
• The printer is not compatible with this machine. Select
other printer that is supported for use with this ma-
chine.
• The printer is not responding. Check if the power of
the printer is turned on, and the cables are connected
correctly.
• The printer is not ready to print, because it is still
warming up. Wait until the printer is ready.
• Take the necessary actions in accordance with the mes-
sage that is displayed. See the manual that comes with
the printer for information about adding paper, replac-
ing toner bottle, closing the cover of the printer, or
clearing misfeeds.
• The printer has functional problems other than those
mentioned above. Check to make sure that the printer
operates normally. See the manual that comes with the
printer.
Troubleshooting
11
187