Outline To Use Scan To Print - Ricoh IS200E Operating Instructions Manual

Outline to Use Scan to Print

The following overview diagram shows the preparation steps for printing scan
data by Print Scan. Note that the underlined steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 "Initial Scanner Setup" for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.89 "Accessing the Scanner"
Configure [1.System Settings] on this machine See p.51 "System Settings"
Configure [Printer] and [Custom Title] settings
on the Web Status Monitor
Configure [General Settings] on the Web Status
Recall the Settings on the Web Status Monitor
Reference
For configuration items, see p.41 "Initial Scanner Setup" and for operation of
configuration, see p.161 "Printing Scanned Image Files".
Monitor
Outline to Use Scan to Print
See p.105 "Information to register in
[Printer]"
See the Web Status Monitor Help for
details about Custom Title settings.
See the Web Status Monitor Help.
See p.108 "Recalling the Settings" for
details.
3
37