KitchenAid KSMTHPS, KSMBLPS - Hand Mixer Manual

PRODUCT USAGE

1. Turn the Stand Mixer OFF/0 and unplug.
2. Attach bowl and flat beater, dough hook, or wire whip to the mixer.
   For tilt head users: Attach bowl and flat beater, dough hook, or wire whip to the mixer and lower and lock the motor head.
   For bowl lift users: Attach flat beater, dough hook, or wire whip to the mixer. Attach bowl and raise into locked position.
3. Place the Pouring Shield: Place the shield onto the bowl so that the motor head covers the u-shaped gap in the shield. This will position the pouring chute just to the right of the attachment hub as you face the mixer. Press lightly so that the Easy Snap tabs snap the shield onto the bowl.
4. Pour ingredients into the bowl through the Pouring Chute.

DISASSEMBLING THE PRODUCT

1. Turn the Stand Mixer OFF/0 and unplug.
2. Lift the front of the Pouring shield off of the bowl.

CARE AND CLEANING

1. Wash the Pouring Shield in warm, soapy water or place it in the top rack of your dishwasher.

In the United States and Puerto Rico:
For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:
Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218
Outside the United States and Puerto Rico:
Consult your local KitchenAid dealer or the store where you purchased the Pouring Shield for information on how to obtain service.
For service information in Canada:
Call toll-free 1-800-807-6777.
For service information in Mexico:
Call toll-free 01-800-0022-767.