Tape Time-Remaining Display; Set The Tc-20/Tc-30 Switch - RCA CC174 Owner's Manual

The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The
TC-2O/TC-30
switch must be set to the correct
position before the camcorder can correctly calculate time remaining.
CAMERA/PLAY
Switch in CAMERA
\
TC-2O/TC30 Switch
Time-Remair
TAPE END
90MIN
Display in Viewfinder
g Display
-9OMIN
1
89MIN
i
I
I
3M*I
N
L
2MIN
(Flashing)
I
IMIN
(Flashing)
1
OMIN
(Flashing)
Set the
TC-2O/TC30
Switch
Before recording, set the
TC-20/K-30
switch for the size of tape you are using.
l
Select
TC-20
when using a tape with
20-minutes or less recording time
when using SP recording speed.
l
Select
TC-30
when using a tape with
more than 20-minutes recording time
using SP recording speed.
The time-remaining indicator will start
flashing when the remaining tape time
reaches two minutes.
TAPE END
appears when the tape
reaches its end during recording or when
a cassette is loaded whose tape is already
at its end.
Note:
The time-remaining display does not
work for TC-40 tapes.