RCA CC174 Owner's Manual page 11

AC036 Monopod
This monopod
gives a flexible
alternative to using
a traditional tripod.
Its rugged compact
design provides
excellent stability.
It is ideal for all
camcorder sizes and photo cameras.
It has a quick-release shoe, three-section
leg, handstrap, foot step and weighs only
35 ounces.
CRF92 RF Output Adapter
This RF output
adapter is used
with a coaxial RF
cable, such as
AHO65G or
AH066G, to
connect your
camcorder to a standard TV (one without
audio/video input jacks) for playback.
If your antenna cable is the flat twin-lead
type attached by two screws, you will also
need a 300-75 ohm transformer such as
193983. If your TV has 300 ohm VHS
screw terminals, you will need an optional
75-300 ohm transformer such as AH01 1.
Coaxial RF Cable
These RF cables are
used with the CRF92
output adapter to
AH065G (6-ft)
connect your camcorder
AH066G (lo-ft)
to a standard TV (one
without audio/video
input jacks) for playback. If your antenna
cable is the flat twin-lead type attached
two screws, you will also need a 300-75
ohm transformer such as 193983. If your
TV has 300 ohm VHS screw terminals,
you will need an optional 75-300 ohm
transformer such as AH0 11.
193983 Cable Transformer
This 300-to-75 ohm
transformer is used to
connect a standard
(300 ohm) antenna twin-lead to a
standard round 75-ohm connector.
AH01 1 Cable Transformer
This 75-to-300 ohm
transformer is used to
connect a standard 75-ohm antenna cable
(such as AH065G or AH066G) to the
300-ohm screw terminals on a TV.
All specifications and ,descriptions
of accessories are subject tbc&nge
j ,I
without notice, ;
,, ,r