Q-See Product Warranty - Q-See QT454-403-5 User Manual

Parameter
COMPRESSION Compression Standard H.264 Baseline
Format
VIDEO Video In Composite 1.0V
p-p/75Ω,
BNC x
Video Out COMPOSITE
1.0V p-p/75Ω,
BNC x 1, VGA
x 1
VGA Resolution 1280x1024, 1024x768, 800x600
Record NTSC: 352x240, 704x480
Resolution PAL: 352x288, 704x576
Display Frame 704x480 at 30FPS
Rate
(per camera)
Record Frame NTSC: D1 7.5FPS CIF 30FPS
Rate PAL: D1 6.25FPS CIF 25FPS
(per camera)
AUDIO Audio Input -8dB~ 22k,
RCA X2
Audio Output -8dB~92dB,
BNC X1
ALARM Alarm Input
Alarm Output
STORAGE Record Mode Manual/Sensor/Timer/Motion Detection
Multi-Function Multiplex
INTERFACE Network RJ45 (LAN, Internet)
Interface
Communication RS485,
Interface USB 2.0 x 2
(One for
Backup, One for
USB Mouse)
CONTROLS PTZ Control Yes
Remote Control Yes
DISK INFO Disk Type SATA x 1 (up to
2TB)
OTHER INFO Voltage
Optimal 50°F to 104°F 10°C to 40°C
Temperature 10% to 90% Humidity
64
QT474 QT446 QT4332
Composite 1.0V Composite 1.0V
p-p/75Ω, p-p/75Ω,
4/ BNC x 16/75Ω, BNC x 32
BNC x 8
COMPOSITE COMPOSITE
1.0V p-p/75Ω, 1.0V p-p/75Ω,
BNC x 1, VGA x BNC x 1, VGA x
1 Loop Out x 2 1, HDMI x 1
1920x1080
1280x1024,
1024x768,
800x600
NTSC: D1 7.5FPS
CIF 30FPS
4CH D1 30FPS if
others CIF
PAL: D1 6.25FPS
CIF 25FPS
-8dB~ 22k, -8dB~ 22k,
RCA X16 RCA X16
-8dB~92dB, -8dB~92dB,
RCA X1 RCA X1
0 NO or NC 16CH NO or NC 16CH
0 1CH 4CH
eSATA x2 RS485,
USB 2.0 x 2
(One for Backup, One for USB
Mouse)
SATA x 4 (up to SATA x 4 (up to
2TB) 2TB)
12V5A 110/220

Q-SEE PRODUCT WARRANTY

Q-See is proud to back all of our products with a conditional service warranty covering all
hardware for 12 months from the date of purchase. Additionally, our products also come with
a free exchange policy that covers all manufacturing defects for one month from the date of
purchase. Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the following
reasons are not within the free service scope of our company:
1. Equipment damage caused by improper operation.
2. Improper equipment operation environment and conditions (e.g., improper power,
extreme environmental temperatures, humidity, lightning and sudden surges of
electricity).
3. Damage caused by acts of nature (e.g., earthquake, fire, etc).
4. Equipment damage caused by the maintenance of personnel not authorized by Q-See.
5. Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration process after
purchasing our product. To do this, simply fill out the User's Information Card on our website
at www.Q-See.com
65