Projectiondesign cineo3+ 1080 User Manual page 26

SERVICE INFORMATION
This product contains no user serviceable parts.
If the product fails to function as expected, please first check that all
connections are properly made, and that the power cord is properly
connected.
Please check that the projector as well as the video and computer
sources are all switched on.
Cables and cords may break over time. Try to change cables and cords,
in case there is a bad or intermittent connection.
Check if the circuit breaker or fuse of your mains is intact.
In the event of product failure, please contact your reseller. You should
prepare a description of the symptoms of failure you experience.
Please also state product number and serial number as printed on the
label on the bottom of the projector.
SERVICE PERSONNEL INFORMATION
WARNING
Use UV radiation eye and skin protection during servicing
6