Projectiondesign cineo3+ 1080 User Manual page 12

KEYPAD
SHUTTER
Press SHUTTER to stop the projected image completely.
TEMP
Controls the color temperature of the displayed image. Use arrow keys to change.
GAMMA
Push GAMMA, then arrow keys to select between gamma tables.
D65/UNCORR
Toggle between D65 and uncorrected color temperature.
ORIENT
Press ORIENT, then arrow keys to cycle between desktop, ceiling, front and rear
combinations.
COLOR
Press COLOR then arrow keys to adjust color boost.
CONTRAST
Press CONTRAST, then arrow keys to adjust image contrast electronically (not optical
iris).
BRIGHT
Press BRIGHT, then arrow keys to adjust image brightness electronically (not lamp
intensity).
LAMP 1
Press key 2 seconds to switch lamp 1 on or off. Observe wait time required after
switching off before switching on again. If lamp 2 is off, pressing this key will switch
lamp 1 off and lamp 2 on.
LAMP 
Press key 2 seconds to switch lamp 2 on or off. Observe wait time required after
switching off before switching on again. If lamp 1 is off, pressing this key will switch
lamp 2 off and lamp 1 on.
LAMP 2 ORIENT TEMP
1 1 1