Medela Symphony - Breast Pump Manual

Quick Start Guide

Note: This quick guide does not replace the complete instructions for use. Please refer to the Symphony instructions for use for further information.

Wash hands thoroughly with soap and water before touching the breast pump, the pump sets and breasts.

INITIATE program

You can tell this program is running from these symbols on the display:

1. Press the On/off button Press power
   
2. Press the 'Let-down' button within 10 seconds to use the INITIATE program
   
3. Set maximum comfort vacuum
   

NOTE: Program ends automatically

MAINTAIN program

You can tell this program is running from these symbols on the display:

1. Press the On/off button Press power
   
   wait >
2. The MAINTAIN program will automatically start with the stimulation phase
   
3. If milk begins flowing before the two minutes have passed, press the 'Let-down' button to switch straight to the expression phase. After 2 minutes in the stimulation phase, the pump switches automatically to the expression phase.
   
4. Set maximum comfort vacuum
   

NOTE: Program does not end automatically

For maximum effectiveness, efficiency and comfort, always double pump with your maximum comfort vacuum and correctly fitted breast shields. Go to www.medela.com/fittingguide to find your breast shield size. Adjust to your maximum comfort vacuum by turning the vacuum knob to the right to increase suction until you experience slight discomfort. Next, turn it to the left to decrease suction until it is comfortable.