Step
3. Select the Config. Control
menu.
4. Scroll through the parameters
until you reach Save Config.
5. Select Save Config.
6. Scroll through the options (1-8)
until you reach the desired
value.
7. Select the current value. An
asterisk appears next to it.
•
If the configuration number has been previously
saved and the "Protect Config." option is enabled, this
error message appears briefly:
•
If the configuration number has not been previously
saved or the "Protect Config." option is disabled, the
STAND BY light flashes, and this message appears:
8. Lock the ENTER key.
9. Place the printer online (LCD
depends on printer emulation).
NOTE: To make the new printer configuration active at power-up,
Press
OR
ENTER
+
ON LINE
select the configuration as the "Power-Up Config."
Saving New Configurations
LCD Message
CONFIG CONTROL
Load Config.
CONFIG CONTROL
Save Config.
Save Config.
1*
Save Config.
4
Save Config.
4*
CFG FILE EXISTS
DELETE FIRST
STAND BY...
then
Save Config.
4*
ENTER SWITCH
LOCKED
ONLINE
LINEPRINTER+
53