Starting A Standard Single-Image Screen; Starting The Slide Show Setup Screen; Starting The Slide Show Screen; Adjusting The Picture Quality - Pioneer PRO-1130HD Operating Instructions Manual

Enjoying through External Equipment

Starting a standard single-image screen

When the thumbnail screen is displayed, press
to highlight a desired image, and then press ENTER. The
thumbnail screen closes, and only the selected image is
displayed.
Home Gallery
Picture information
IMG_0011.JPG
2272 X 1704
2003. 01. 01
Display a Picture
Full Screen
Zoom In
Zoom Out
Rotation
Select
RETURN Return
HOMEMENU Exit
With the above screen displayed, you can use the following
keys to perform various operations:
and :
/ /
Scrolls the displayed image when the entire image is not
displayed.
RED:
Displays the image using the full screen. To quit the full-screen
display, press RETURN. With an image displayed in the full
screen, you may press CH +/CH – to display the next or
previous image in the full screen.
GREEN:
Enlarges the displayed image (if allowed by the image).
YELLOW:
Reduces the displayed image (if enlarged by pressing the
GREEN button).
BLUE:
Rotates the displayed image clockwise. Each press rotates the
image in the sequence; 90°, 180°, and then 270°.
HOME MENU:
Quits the Home Gallery function.
NOTE
• Be careful not to display the same image for an extended
period of time. The image may be burnt into the screen,
resulting in a residual image.
• Images smaller than 1024 × 768 pixels are displayed with
blank surrounding.
• You may not be able to enlarge or reduce images because of
their original sizes.

Starting the Slide Show Setup screen

When the thumbnail screen is displayed, press GREEN to start the
/ and /
screen to set up the Slide Show that sequentially changes images.
1
Select "Display Mode". ( / )
2
Select "Normal" or "Full". ( / )
• With "Full" selected, images are displayed using the full
screen.
3
Select "Playback Order". ( / )
4
Select "Name Order" or "Random". ( / )
5
Select "Number Of Times Of Playback". ( / )
6
Select "Single Time" or "Loop". ( / )
• With "Loop" selected, Slide Show is repeated until
RETURN is pressed.
7
Select "Playback Mode". ( / )
8
Select "Auto" or "Manual". ( / )
• With "Auto" selected, images are automatically
changed at the specified intervals.
• With "Manual" selected, images are changed each time
you press CH +/CH –.
Slide Show Setup
Display Mode
Playback Order
Number Of Times Of Playback
Playback Mode
Interval(sec)
9
If you have selected "Auto" in step 8, press
"Interval(sec)", and then press
display duration for individual images.
• You can select from among 3 seconds, 5 seconds, 10 seconds,
20 seconds, 30 seconds, 60 seconds, and 90 seconds.
10
To start the Slide Show screen, press the red button.
• To restore the thumbnail screen, press RETURN.
• To quit the Home Gallery function, press HOME MENU.

Starting the Slide Show screen

After setting up the Slide Show, you can start it to sequentially
change the images.
1
To start the Slide Show screen, press the red button when the
Slide Show Setup screen or a thumbnail screen is displayed.
• With "Auto" selected for "Playback Mode", images are
automatically changed at the specified intervals.
• With "Manual" selected for "Playback Mode", press
CH +/CH – to change images.
• While images are automatically changed, you can stop
and hold automatic image change for approximately 90
seconds by pressing FREEZE.
2
When quitting the Slide Show screen, press RETURN to
restore the thumbnail screen or HOME MENU to quit the
Home Gallery function.
NOTE
• With "Random" selected for "Playback Order", you cannot
press CH – to manually change images.

Adjusting the picture quality

When a thumbnail screen is displayed, press YELLOW. The
same picture adjustment screen as the PC source is displayed.
For the subsequent procedure, see page 59.
Normal Full
Name Order Random
Single time Loop
Auto Manual
3 5 10 20 30 60 90
/ to select
/ to select the desired
12
81
En