Adjustments And Settings; Sleep Timer; Av Selection - Pioneer PRO-1130HD Operating Instructions Manual

Adjustments and Settings

11
Adjustments and Settings

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.
Press SLEEP to select the desired time.
• The timer starts counting.
• Each time you press SLEEP, the selection is switched as
below:
30
Off
(cancel)
• The factory default is "Off".
NOTE
• To cancel the Sleep Timer, select "Off" by pressing SLEEP.
• Five minutes before the selected time elapses, the remaining
time appears every minute.
You can also use the menu to set the Sleep Timer.
1
Press HOME MENU.
2
Select "Sleep Timer". ( /
3
Select the desired time. ( /
4
Press HOME MENU to exit the menu.

AV Selection

Select from the six viewing options, depending on the current
environment (e.g., room brightness), the type of the current TV
program, or the type of images input from external equipment.
1
Press AV SELECTION.
• The current AV Selection mode appears.
2
Press AV SELECTION again before the displayed mode
disappears.
• For AV source, the mode is switched in this order;
STANDARD, DYNAMIC, MOVIE, GAME, USER, then
PURE.
• For PC source, the mode is switched between
STANDARD and USER.
58
En
60 90
120
(minutes)
then ENTER)
then ENTER)
You can also use the menu to change the options.
1
Press HOME MENU.
2
Select "Picture". ( / then ENTER)
3
Select "AV Selection". ( /
4
Select the desired option. ( /

AV Selection

STANDARD
DYNAMIC
MOVIE
GAME
USER
PURE
For AV source
Item Description
For a highly defined image in a normally bright
STANDARD
room
This selection is shared by the external input and
TV input sources.
For a very sharp image with maximum contrast
DYNAMIC
This mode does not allow manual image quality
adjustment.
This selection is shared by the external input and
TV input sources.
For movies
MOVIE
This selection is shared by the external input and
TV input sources.
Lowers image brightness for easier viewing.
GAME
This selection is shared by the external input and
TV input sources.
Allows you to customize settings as desired. You
USER
can set the mode for each input source.
Reflects input signals as faithfully as possible.
PURE
You may select this option to check image
materials, for example.
For PC source
Item Description
For a highly defined image in a normally bright room
STANDARD
(factory default)
Allows you to customize settings as desired. You can
USER
set the mode for each input source.
5
Press HOME MENU to exit the menu.
NOTE
• You can also press AV SELECTION on the remote control
unit to switch the viewing option.
• If you have selected "DYNAMIC", you cannot select
"Contrast", "Brightness", "Color", "Tint", "Sharpness", "Pro
Adjust" and "Reset"; these menu items are dimmed.
then ENTER)
then ENTER)