Basic Operations; Turning On The Power (Standby); Turning Off The Power (Standby) - Pioneer PRO-1130HD Operating Instructions Manual

Basic Operations

Basic Operations

Turning on the power (Standby)

1
Press a on the Plasma Display if the STANDBY indicator
is off.
• The STANDBY indicator on the Plasma Display lights up
red.
2
Confirm that the STANDBY indicators light up red, and
then press TV a on the remote control unit or STANDBY/
ON on the Media Receiver to turn the system on.
• The POWER ON indicators on the Plasma Display and
Media Receiver light up blue.
NOTE
• In this manual, "system" means the Plasma Display Panel
and Media Receiver.

Turning off the power (Standby)

1
Press TV a on the remote control unit or STANDBY/ON
on the Media Receiver.
• The system enters the standby mode and the image on
the screen disappears.
• Both STANDBY indicators light up red.
• This will allow the system to automatically receive digital
TV program information while in the standby mode.
NOTE
• If you are not going to use this system for a long period of
time, press POWER on the Plasma Display and remove both
power cord from the power outlet.
Plasma Display/Media Receiver status indicators
The table below shows the operational status of the Plasma
Display System. You can check the current status of the system
with the indicators on the Plasma Display and Media Receiver.
Indicator Status
Plasma Display
POWER ON STANDBY
Flashing
For other than the above, see "Troubleshooting" on page 89.
Media Receiver
POWER ON STANDBY
The power cords of both the Plasma Display and the Media Receiver have been
disconnected. Or, the power cord of the Plasma Display has been connected but
the POWER button of the Plasma Display is off.
Power to the system is on.
The system is in the standby mode.
The power cord of the Media Receiver has been disconnected.
Power to the Plasma Display is off. Or the power cord of the Plasma Display has
been disconnected.
Flashing
Plasma Display
STANDBY indicator
POWER ON indicator
POWER button
Media Receiver
REC
ON STANDBY TIMER
STANDBY/ON
STANDBY indicator
POWER ON indicator
STANDBY/ON button
System Status
06
PULL
OPEN
25
En