Setting A Computer Image To The Correct Rgb Select Screen; Setting High Definition Images To The Suitable Screen Size; Setting The Input Skip; Resetting To The Default Values - Pioneer PDP-42MVE1 Operating Instructions Manual

Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the "RGB SELECT" mode to
"MOTION "
On "RGB SELECT" of "OPTION1" menu, select
"MOTION".
OSD
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
Information
RGB SELECT modes
One of these 8 modes must be selected in order to
display the following signals correctly.
AUTO: Select the suitable mode for the specifications
of input signals as listed in the table "Computer input
signals supported by this system" on page 29.
STILL: To display VESA standard signals. (Use this
mode for a still image from a computer.)
MOTION: The video signal (from a scan converter)
will be converted to RGB signals to make the picture
more easily viewable. (Use this mode for a motion
image from a computer.)
WIDE1: When an 852 dot
horizontal frequency of 31.7kHz is input, the image may
be compressed horizontally. To prevent this, set RGB
SELECT to WIDE1.
WIDE2: When an 848 dot
horizontal frequency of 31.0 kHz is input, the image
may be compressed horizontally. To prevent this, set
RGB SELECT to WIDE2.
WIDE3: When an 1920 dot
horizontal frequency of 74.0 kHz is input, the image
may be compressed horizontally. To prevent this, set
RGB SELECT to WIDE3.
WIDE4: When an 1280 dot
horizontal frequency of 59.8 kHz or an 1680 dot
line signal with a horizontal frequency of 60 kHz is
input, the image may be compressed horizontally. To
prevent this, set RGB SELECT to WIDE4.
DTV: Set this mode when watching digital broadcasting
(480P).
See page 29 for the details of the above settings.
18
En
OPTION1 1 / 3
: RGB
: RGB
: MOTION
×
1024 768
: OFF
: OFF
ADJ. EXIT RETURN
480 line signal with a
480 line signal with a
1200 line signal with a
768 line signal with a
1050
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "HD SELECT" mode to "1035I"
On "HD SELECT" of "OPTION1" menu, select "1035I".
OPTION1
OSD
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL. ADJ.
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B: Standard digital broadcasts
1035I: Japanese "High Vision" signal format
1080A: Special Digital broadcasts (for example :
DTC100)

Setting the Input Skip

When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT/EXIT button on
the unit.
Example: Set to "ON"
On "INPUT SKIP" of "OPTION1" menu, select "ON".
OPTION1
OSD
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL. ADJ.
Information
INPUT SKIP settings
OFF: Regardless of the presence of the signal, scan
and display all signals.
ON: If no input signal is present, skip that signal.
* "SETTING NOW" will appear during the input search.

Resetting to the default values

Use these operations to restore all the settings (PICTURE,
SOUND, SCREEN, OPTION1~3, etc) to the factory
default values.
Refer to page 12 for items to be reset.
On "ALL RESET" of "OPTION1" menu, select "ON", then
press the MENU/SET button.
OPTION1 1 / 3
OSD
BNC INPUT : RGB
D-SUB INPUT : RGB
RGB SELECT : AUTO
HD SELECT : 1080B
INPUT SKIP : OFF
ALL RESET : ON
NEXT PAGE
SEL. MENU OK EXIT RETURN
When the "SETTING NOW" screen disappears, then all the
settings are restored to the default values.
1 / 3
: RGB
: RGB
: AUTO
: 1035 I
: OFF
: OFF
EXIT RETURN
1 / 3
: RGB
: RGB
: AUTO
: 1080B
: ON
: OFF
EXIT RETURN
ALL RESET
SETTING NOW