Clock Setting - Pioneer PDP-4345HD Operating Instructions Manual

Tuner Setup
The following table shows the parameters selectable for each
item.
Item Selection
Font Size Auto/ Large/ Standard/ Small
Font 1 Auto/ Font 1/ Font 2/ Font 3/ Font 4/
Font 5/ Font 6/ Font 7
Font Color Auto/ Black/ White/ Red/ Green/ Blue/
Yellow/ Magenta/ Cyan
Font Opacity Auto/ Solid/ Transparent/ Translucent/
Flashing
Background Color Auto/ Black/ White/ Red/ Green/ Blue/
Yellow/ Magenta/ Cyan
Background Opacity Auto/ Solid/ Transparent/ Translucent
1
Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with
serifs)/ Font 3 (monospaced without serifs)/ Font 4 (proportionally
spaced without serifs)/ Font 5 (casual font)/ Font 6 (cursive font)/
Font 7 (small capitals font)
With "Auto" selected, parameters specified by the provider are
used; if not specified by the provider, the bolded default
parameters are used. If you select parameters other than
"Auto", the selected parameters are used regardless of
provider's specifications.

Clock Setting

With "Auto Set" selected for Clock Setting, the system acquires
and sets time information automatically. You can also manually
set the correct time. If you disconnect the power cord from the
power outlet or power blackout occurs, the set time is cleared.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Clock". ( / then ENTER)
4
Select "Time Zone". ( /
5
Select a time zone for your area. ( /
Clock Time Zone
Atlantic
Time Zone
Eastern
Central
Mountain
6
Select "D.S.T." ( , / , then ENTER)
then ENTER)
then ENTER)
then ENTER)
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:55 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
7
Select "Applies" or "Does Not Apply". ( /
• Make this selection, depending on whether summer
time is employed in your area.
Clock Daylight Savings Time
D.S.T.
Applies
Does Not Apply
8
Select "Auto/Manual Set". ( ,
9
Select "Auto Set" or "Manual Set". ( /
10
If you select "Auto Set", select an antenna (A or B) and a
channel number using
Clock Auto/Manual Set Clock Set Channel
Auto/Manual Set •Auto Set Ant. A
• The date and time will be automatically corrected using
data from the selected channel.
If you select "Manual Set", manually set the date and
time using / , /
Clock Auto/Manual Set Date and Time
3
4
Auto/Manual Set •Manual Set 3 /17/04
5
6
11
Press HOME MENU to exit the menu.
• When the time has not been set, the REC TIMER indicator on the
front of the Media Receiver blinks.
• When the time has not yet been set, you cannot view channel banner
information, use auto channel select, and preset TV programs for
recording.
then ENTER)
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:56 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu
Exit
/ , then ENTER)
then ENTER)
/ and ENTER.
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
2.0 xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu
Exit
and ENTER.
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
11:58pm xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
09
39
En