Focus; Front Surround; Power Control; Energy Save - Pioneer PDP-4345HD Operating Instructions Manual

Adjustments and Settings

FOCUS

This shifts the sound coming direction (sound images) upward
and produces clear sound contours.
1
Press HOME MENU.
2
Select "Sound". ( / then ENTER)
3
Select "FOCUS". ( / )
4
Select the desired parameter. ( / )
Item Description
Off Deactivates the FOCUS.
(factory default)
On Activates the FOCUS.
5
Press HOME MENU to exit the menu.

Front Surround

This provides three-dimensional sound effects and/or deep, rich
bass.
1
Press HOME MENU.
2
Select "Sound". ( / then ENTER)
3
Select "Front Surround". ( / )
4
Select the desired parameter. ( / )
Item Description
Off Deactivates both the SRS and TruBass.
SRS Reproduces highly effective three-
dimensional sound.
TruBass Provides deep, rich bass using a new
(factory default) technology.
TruBass + SRS Provides both TruBass and SRS effects.
5
Press HOME MENU to exit the menu.
• (WOW) designates a status where the FOCUS is on and
TruBass + SRS has been selected for Front Surround.
• is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS Labs, Inc.

Power Control

Power Control provides convenient functions for power saving.

Energy Save

You can save power consumption by decreasing the picture
brightness. When you need not watch the screen and want to
enjoy only audio, you can also deactivate the screen.
1
Press HOME MENU.
2
Select "Power Control". ( /
3
Select "Energy Save". ( /
4
Select "Save" or "Picture Off". ( /
Item Description
Standard Does not decrease picture brightness.
(factory default)
Save Decreases picture brightness to save power.
Picture Off Deactivates the screen to save power. To
restore the screen display, press any button
other than VOL +/– and MUTING.
This setting is not memorized by the system.
5
Press HOME MENU to exit the menu.
• You can also select this function using the Home menu when the
input source is a PC.

No Signal off (AV mode only)

The system will be automatically placed into the standby mode
if no signal is received for 15 minutes.
1
Press HOME MENU.
2
Select "Power Control". ( /
3
Select "No Signal off". ( /
4
Select "Enable". ( / then ENTER)
Item Description
Disable Does not place the system into the
(factory default) standby mode.
Enable Places the system into the standby mode if
no signal is received for 15 minutes.
5
Press HOME MENU to exit the menu.
• Five minutes before the system is placed into the standby mode, a
message appears every minute.
• The system may not be placed into the standby mode when noise
signals are present at the Media Receiver after a TV program finishes.
then ENTER)
then ENTER)
then ENTER)
then ENTER)
then ENTER)
10
43
En