Table of Contents
Advertisement
Playback with HOME MEDIA GALLERY inputs
Readable data files
Movie, music and photo files can also be played with the
exception of Digital Rights Management (WMDRM10)
protected files.
Note
• A single USB device can be connected at a time and
no USB hub connected.
• This system may not be able to display modified or
edited content from a PC or other equipment.
• This system supports the USB Mass Storage Class.
• Some digital cameras may require a setup procedure
for Mass Storage Class data transfer. The setup is
done on the camera. See the operating instructions
supplied with the digital camera.
• This system may not be able to display images,
depending on the type of your memory card, or
camera.
Removing a USB device
To remove a USB device, exit the Home Media Gallery
first and then disconnect the device.
Note
• Be sure to exit the Home Media Gallery screen before
removing the USB device. If you remove the USB
device while the Home Media Gallery screen is
displayed, data inside the memory may be damaged.
• Do not insert or remove the USB device immediately
after this receiver is switched on or off. This action
may cause data inside the memory to be damaged.
• Pioneer is not liable for any loss or damage to the
data inside the USB flash drive.
Starting the Home Media Gallery
function
1
Press HOME MEDIA GALLERY.
The Home Media Gallery screen is displayed.
2
Select 'Media Navigator', 'USB', 'My Playlist'
or 'Setup' (/ then ENTER).
• To return to the previous screen, press RETURN.
• To exit Home Media Gallery, select other input
source.
Home Media Gallery
Media Navigator
Server
XXXXXX
USB
My Playlist
Setup
Navigating the files and folders
By selecting Media Navigator, the previously selected
server menu is automatically displayed on the screen by
default (page 92). When only one server is found, the
system automatically connects the server. You can also
use the Tool Menu to switch to another server or
manually select a server from the Server List. The display
is automatically changed to a server list if there are no
previously navigated servers.
1
Press HOME MEDIA GALLERY.
The Home Media Gallery screen is displayed.
2
Select 'Media Navigator' (/ then ENTER).
A server menu appears. The file/folder configuration may
vary depending on the server selected.
After selecting a category, folder or container and
navigating on subsequent screens, you can find a file and
start the appropriate Player depending on the selected
file.
3
Select the desired folder to navigate or file/content
to play (/ or / then ENTER).
4
Press ENTER to display a subsequent screen.
Subsequent screen appears.
To return to the previous screen, press RETURN.
To exit Home Media Gallery, select other input source.
09
1
81
En
Hide quick links:
Advertisement
Table of Contents
