Connecting a satellite/cable receiver or other set-top box
Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called 'set-top boxes'.
SC-09TX
(AUDIO)
S400
XM
IN
COAXIAL
1
1
IN
IN
ASSIGNABLE
(DVD/LD)
(DVD/LD)
1
4
2
IN
(BD)
IN
3
(CD)
IN
4
(SACD)
ZONE2
OUT
ZONE3
/SOURCE
OUT
SOURCE
OUT
1
Connect the audio/video outputs on the set-top
box to the SAT AUDIO and VIDEO inputs.
Connect using a stereo RCA/phono jack cable and a
1
video or S-Video
cable.
2
Connect an optical-type
your set-top box to the OPTICAL IN 2 (SAT) input.
Use an optical cable for the connection.
Note
1 See The Input Setup menu on page 101 to assign the S-VIDEO input to the SAT input function if you make this connection.
2 If your set-top box only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial digital audio cable.
When you set up the receiver you'll need to tell the receiver which input you connected the set-top box to (see The Input Setup menu on page 101).
3 If your satellite/cable receiver doesn't have a digital audio output, you can skip this step.