Table of Contents
Advertisement
Using other functions
12
Adjusting the surround B speaker delay (Surr
B DELAY)
The listening area can be expanded by setting the
surround B speaker to the array mode. This results in a
sound field with good front/rear and left/right sound
connectivity. Depending on the position of the speakers
and the listening position, however, in some cases
adding a delay to the speakers set to the array mode can
result in a more natural surround effect. In such cases, it
is possible to set the surround B channel to the array
mode using the "Surr B DELAY" audio adjustment
function, add delay processing to the surround B
channel and fine-adjust. The delay can be set between 0
and 20 ms with a high precision of 1 ms. Adjust the delay
value while playing movies or music and set it to the
desired position to achieve a more natural surround
1
sound.
Setting the Video options
There are a number of additional picture settings you can
make using the Video Parameter menu. The defaults, if
not stated, are listed in bold.
Important
• Note that if an option cannot be selected on the Video
Parameter menu, it is unavailable due to the current
source, setting and status of the receiver.
1
Press VIDEO PARAMETER.
Use / to select the setting you want to adjust.
2
Depending on the current status/mode of the receiver,
certain options may not be able to be selected. Check the
table below for notes on this.
Use / to set it as necessary.
3
See the table below for the options available for each
3
setting.
Note
1 In the cases described below, Surr B DELAY cannot be selected (and the effect is turned off even if a value is set).
– When the Output Setup is set to anything other than Normal
– When surround B (Surr B) is set to NO at the speaker settings
– When the speaker system A/B is set to anything other than A+B ON or OFF
– When using headphones
– When in the pure direct mode
– When the audio adjustment function's HDMI audio output is set to THROUGH
2 Adjustments can be performed while watching the actual screen by pressing ENTER after selecting the setting item. (This may not be possible for some
video signals.)
3 • All of the setting items can be set for each input source.
• Setting items other than VIDEO CONV. can only be selected when VIDEO CONV. is set to ON.
108
En
4
Press RETURN to confirm and exit the menu.
Setting
What it does
VIDEO
Converts video signals for output
CONV.
from the MONITOR OUT jacks for
(Digital
all video types.
Video
Conversion)
BRIGHTNESS Adjusts the overall brightness.
CONTRAST Adjusts the contrast between light
and dark.
Adjusts the red/green balance.
HUE
CHROMA
Adjusts saturation from dull to
bright.
LEVEL
Setting for reducing roughness of
NR
the picture.
Specifies the output resolution of
a
RESOLUTION
the video signal (when analog video
input signals are output at the HDMI
OUT connector and/or component
video out terminal, select this
according to the resolution of your
monitor and the images you wish to
watch). When AUTO is selected, the
resolution is automatically selected
depending on the capability of the
display connected to this receiver.
ASPECT
Specifies the aspect ratio when
analog video input signals are
output from all of the MONITOR OUT
terminals. Make your desired
settings while checking each setting
2
on your display (if the image doesn't
match your monitor type, cropping
or black bands appear).
a.• When set to a resolution with which the TV (monitor) is not compatible,
no picture is output. Also, in some cases no picture will be output due to
copyright protection signals. In this case, change the setting.
• When AUTO is selected, the resolution is selected automatically
according to the capacity of the TV (monitor) connected by HDMI. When
PURE is selected, the signals are output with the same resolution as when
input.
• This setting is valid for HDMI and component outputs.
Option(s)
ON
OFF
–10 to +10
Default: 0
–10 to +10
Default: 0
–10 to +10
Default: 0
–10 to +10
Default: 0
0
–10 / –5 /
+5 / +10
AUTO
PURE
480i/576i
480p/576p
720p
1080i
1080p
THROUGH
(none)
NORMAL
ZOOM
Hide quick links:
Advertisement
Table of Contents
