Still Frame/Slow Play/Frame Advance Playback - Pioneer DV-AX10 Operating Instructions Manual

Advanced Functions

Still Frame/Slow Play/Frame Advance Playback

The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced
frame by frame.
Î
DISPLAY AUDIO
SETUP
FUNCTION
MEMORY ADJUST
F.MEM
STOP
PLAY 3
7
PREVIOUS NEXT
4 ¢
RETURN
1
4
Viewing a still frame
Press PAUSE 8.
When viewing a DVD, if the paused
picture shakes, select the "Field" setting
in the Setup screen Video menu [Still
Picture] setting as described in the
section below.
To return to normal playback
When viewing a still frame playback,
pressing PAUSE 8 or PLAY 3 restores
normal playback operation.
Selecting the type of paused
image to display
This function lets you view a clear still-
image when DVD playback is paused.
Audio1 2 Video
TV Screen –
Component Video – Interlace
Still Picture Field
On Screen Display – On
OSD Position – Normal
Angle Indicator – On
Move
Field
Picture shake will be eliminated during a
paused picture.
Frame
Select to obtain higher picture quality.
Auto (Factory setting)
Selects [Field] or [Frame] automatically
according to the disc.
46
En
OPEN/CLOSE
SUBTITLE ANGLE
TOP MENU
MENU
ENTER
VIDEO
DIMMER JOG MODE
V.ADJ FL JOG
PLAY PAUSE
PAUSE 8
3 8
REV FWD
1 ¡
STEP/SLOW SEARCH MODE STEP/SLOW
e E
e/E
CLEAR
2 3 C
5 6 + 10
Expert
Language General
16:9(Wide)
Field
Frame
Auto
SETUP Exit
Viewing slow playback
With this function, DVDs can be viewed in both forward and reverse
directions. Slow playback of Video CDs can only be viewed in the
forward direction.
Press and hold STEP/SLOW E for about 2 seconds during
playback.
• Slow playback is engaged.
• During slow playback, the speed of playback can be adjusted from
1/16 normal playback speed to 1/2 normal playback speed in four
steps (1/16 – 1/8 – 1/4 – 1/2) using STEP/SLOW e and E.
To reverse the playback direction, press PAUSE 8 and then press
STEP/SLOW e or E.
Press and hold STEP/SLOW e for about 2 seconds during
DVD playback.
• Slow playback in the reverse direction is engaged.
• During slow playback, the speed of playback can be adjusted from
1/2 normal playback speed to 1/16 normal playback speed in four
steps (1/2 – 1/4 – 1/8 – 1/16) using STEP/SLOW e and E.
To reverse the playback direction, press PAUSE 8 and then press
STEP/SLOW e or E.
To return to normal playback
When viewing still frames or slow playback, pressing PLAY 3 restores
normal playback operation.
Frame by frame advance playback: Viewing
one frame at a time
With this function, DVDs can be viewed in both forward and reverse
directions. Video CDs can only be moved in the forward direction.
1 Press PAUSE 8.
2 Press STEP/SLOW e or E.
STEP/SLOW E: The picture advances one frame each time the
button is pressed.
STEP/SLOW e: The picture backs up a DVD a few frames each
time the button is pressed.
To return to normal playback
When viewing frame by frame playback, pressing
PLAY 3 restores normal playback operation.
Notes
• You can enjoy slow and frame by frame playback using MULTI DIAL on
the remote control (pages 47 and 48).
• There is no sound when viewing still frames or slow playback, or when
advancing one frame at a time.
• When video information is recorded on a DVD-Audio disc, still frame,
slow playback and frame by frame playback is possible.
• When the paused picture shakes, set the [Still Picture] setting to "Field".
• Still frame, slow play, or frame advance playback may not be possible
with certain titles. In this case, the
• With Video CDs, slow or scan playback is not possible when the menu
is displayed (PBC playback).
• For more information about slow and frame by frame playback, refer to
the memo information in the section 'Scanning in Forward and Reverse
Directions at Different Speeds' on pages 47 and 48.
– DVD/Video CD
or mark is displayed.