Pioneer DV-AX10 Operating Instructions Manual page 22

Setting Up the Player
Setting digital audio connections to an AV amplifier or decoder
Setting compatibility with 96 kHz output
Confirming the settings
22
En
Audio1 2 Video Language General
Setup Navigator Dolby Digital
Dolby Digital/DTS
Amp Connection Dolby Digital/MPEG
Digital Jack Dolby D/DTS/MPEG
PCM
Not Connected
Compatible with Dolby Digital
Move Select Exit
ENTER SETUP
Audio1 2 Video Language General
Setup Navigator
Amp Connection
No
96 kHz PCM Audio
Yes
Don't Know
Digital jack not compatible with 96 kHz
Move ENTER Select SETUP Exit
Audio1 2 Video Language General
Setup Navigator
Valid
Exit Setup Navigator
Invalid
Redo
Confirm setup adjustments
Move ENTER Select SETUP Exit
The [Digital Jack] screen establishes whether digital connections
have been made to an AV amplifier, receiver, or external decoder. As
there are numerous options available, please refer to the instructions
supplied with the component the player is connected to to determine
what digital audio formats can be decoded. If you have made no digital
connections, select "Not Connected".
Settings: Dolby Digital (Factory setting)
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
The [96 kHz PCM Audio] screen establishes whether or not the AV
component the player is connected to is capable of processing an
audio signal with a sampling rate of 96 kHz. This screen only appears if
connections have been made to an external AV component as
determined in previous screens.
Settings: No (Factory setting)
Select if the connected AV component cannot process an
audio signal with a sampling rate of 96 kHz.
Yes
Select if the connected AV component can process an audio
signal with a sampling rate of 96 kHz.
Don't Know
Select if you are uncertain whether the connected AV
component can process an audio signal with a sampling rate
of 96 kHz.
The [Exit Setup Navigator] is the final screen in the Setup Navigator.
Settings: Valid (Factory setting)
Select to have the player make all of the necessary audio,
video and language settings automatically.
Invalid
Select to exit the Setup Navigator without changing any of
the system settings.
Redo
Select to return to the [OSD Language] screen of the Setup
Navigator and do the settings again.
To exit the Setup screen
When you have completed setting up the player using the Setup
Navigator or if you exit the Setup Navigator, the Setup screen General
menu appears. Press SETUP to close the Setup screen.
To change other player settings in the Setup screen menus
The procedure for changing the settings in the Setup screen menus is
described on page 27.