Still Frame/Slow Play/Frame Advance Playback - Pioneer DV-636D Operating Instructions Manual

Still Frame/Slow Play/Frame
Advance Playback
The video images on DVD and Video CD can be viewed
as a still frame, played back at slow speeds and even
advanced frame by frame.
e STEP/SLOW E
Viewing a still frame
Press PAUSE 8.
When viewing a DVD, if the paused picture shakes,
select the [Field] setting in the Setup screen Video
menu [Still Picture] setting as described in the section
below.
To return to normal playback
When viewing a still frame playback, pressing PAUSE 8
or PLAY 3 restores normal playback operation.
Selecting the type of paused image
to display
Expert
This function lets you view a clear still-image when DVD
playback is paused.
Make changes in the [Still Picture] setting in the Setup
screen Video menu in the [Expert] menu mode (page
30).
Audio1 Audio2
On Screen Display –
Angle Indicator – On
Settings: Field
(Picture shake will be eliminated during a
paused picture.)
Frame
(Select to obtain higher picture quality.)
Auto*
(Selects [Field] or [Frame] automatically
according to the disc.)
42
En
– DVD/Video CD
A-B
MENU TOP MENU
SETUP
RETURN
DISPLAY
5 5 ¶
¶
3
2
NEXT
PREV
¢
4
∞ 5 ¶
¶
7 3 8
PLAY PAUSE
STOP
¶
e E 1 ¡
REV FWD
STEP/SLOW
3
1 2 CLEAR
6 +10
5
4
¶
9 0
7 8
Video Language General
TV Screen – 16:9(Wide)
Video Out – Video
S-Video Out – S2
Still Picture Field
Frame
Auto
Move SETUP Exit
* Factory setting
Viewing slow playback
Press and hold STEP/SLOW E during
playback.
• Slow playback is engaged.
• During slow playback, the speed of playback can be
adjusted from 1/2 normal playback speed to 1/16
normal playback speed in four steps using
STEP/SLOW e and E.
PLAY 3
PAUSE 8
Press and hold STEP/SLOW e during DVD
playback.
• Slow playback in the reverse direction is engaged.
• In the reverse direction, the playback speed can be
set to high or low.
To return to normal playback
When viewing still frames or slow playback, pressing
PLAY 3 restores normal playback operation.
Frame by frame advance playback:
Viewing one frame at a time
1
Press PAUSE 8.
2
Press STEP/SLOW e or E.
STEP/SLOW E : The picture advances one frame
STEP/SLOW e : The picture reverses one frame each
To return to normal playback
When viewing frame by frame playback, pressing
PLAY 3 restores normal playback operation.
Notes
• There is no sound when viewing still frames or slow
playback, or when advancing one frame at a time.
• Still frame, slow play, or frame advance playback may not
be possible with certain titles. In this case, the
displayed.
• Depending on the disc, there may be some shaking of the
video image during slow reverse playback.
1/16 – 1/8 – 1/4 – 1/2
each time the button is pressed.
time the button is pressed.
mark is