Modine Manufacturing HDB Installation Instructions

BLOWER ENCLOSURE, FILTER RACK ASSEMBLY
HDB Model Shown
BTS Model Shown
PLEASE BE SURE TO LEAVE IT WITH THE OWNER WHEN YOU LEAVE THE JOB.
THIS MANUAL IS THE PROPERTY OF THE OWNER.
INSTALLATION INSTRUCTIONS
blower enclosure and filter rack
models HDB, HDC, BTP, BTS
WARNING
Gas supply shall be shut-off and the electrical power
disconnected before proceeding with the installation.
Failure to do so could result in fire, explosion, electrical
shock, or the unit starting suddenly resulting in injury.
IMPORTANT
1. The use of this manual is specifically intended for a
qualified installation and service agency. All installation
and service of these kits must be performed by a
qualified installation and service agency.
2. These instructions must also be used in conjunction
with the Installation and Service manual originally
shipped with the appliance being converted, in addition
to any other accompanying component supplier
literature.
TABLE OF CONTENTS
Instructions – Blower Enclosure................................. 2-3
Instructions – Filter Rack..............................................4
6-599.2
5H0800590000
September, 2021