Starting The Slideshow - Pentax Q Operating Manual

Starting the Slideshow

1
Select [Start] in Step 2 on p.162, and press the 4 button.
Or, select u (Slideshow) in the playback mode palette,
and press the 4 button.
The start screen is displayed and the
slideshow begins.
Available operations
4 button
Four-way controller (4) Shows the previous image.
Four-way controller (5) Shows the next image.
Four-way controller (3) Stops playback.
2
Stop the slideshow.
Slideshow ends when one of the following operations is performed
during playback or pause.
- the four-way controller (3) is pressed
- the Q button is pressed
- the 3 button is pressed
- the shutter release button is pressed
- the mode dial is turned
*1 After slideshow ends, the camera switches to normal Playback mode.
*2 After slideshow ends, the camera switches to Capture mode.
For movies, only the first frame is displayed and then the next image is
displayed after the set interval has elapsed. To play a movie during a
slideshow, press the 4 button while the first frame is displayed. After the
playback of the movie is finished, the slideshow will resume.
Pauses/resumes playback.
*1
*1
*2
*2
Start Start
*1
163
6