Pixel Mapping - Pentax Q Operating Manual

194
3
Use the four-way controller (45) to adjust the value.
Press the d/i button to reset the adjustment value. (Available only
when [Green Button] is assigned to the d/i button in [Green Button] of
the [A Rec. Mode 3] menu) (p.144).).
4
Press the 4 button.
5
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Correcting Defective Pixels in the CMOS Sensor

(Pixel Mapping)

Pixel Mapping is a function for mapping out and correcting defective pixels
in the CMOS sensor.
1
Select [Pixel Mapping] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [Pixel Mapping] screen appears.
2
Use the four-way controller (23) to select [Pixel
8
Mapping], and press the 4 button.
Defective pixels are mapped and corrected, and the screen that was
displayed before selecting the menu appears again.
When the battery level is low, [Not enough battery power remaining to activate
Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC115
(optional) or install a fully charged battery.