Pentax Q Operating Manual page 183

The following parameters can be changed.
Parameter
Aspect Ratio
Recorded Pixels
Quality Level
Color Space
Custom Image
White Balance
Sensitivity
High-ISO NR
Shadow Correction
Distortion Correction
5
Use the four-way controller (45) to change the value.
Press the four-way controller (5) to display the setting screen for White
Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (23) to select [Continue] or
[Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the
parameter in Step 5 appears again.
Value
K/J/I/L
JPEG recorded pixels corresponding to
the aspect ratio
C/D/E
sRGB/AdobeRGB
Bright/Natural/Portrait/Landscape/Vibrant/
Radiant/Muted/Bleach Bypass/Reversal
Film/Monochrome/Cross Processing
F/G/H/^/JD/JN/JW/JL/I/
L/f/K
-2.0 to +2.0
Auto/Low/High
Auto/On/Off
On/Off
181
Page
p.121
p.122
p.123
p.123
p.131
p.124
—
p.85
p.129
p.149
7