Selecting Settings To Save In The Camera (Memory) - Pentax Q Operating Manual

Selecting Settings to Save in the Camera
(Memory)
You can select which function settings to save when the camera is turned
off. The following function settings can be saved.
Function
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
1
Select [Memory] in the [A Rec. Mode 3] menu, and press
the four-way controller (5).
The [Memory 1] screen appears.
2
Use the four-way controller (23)
to select an item, and use the
four-way controller (45) to
select O or P.
Turn the e-dial to display the [Memory 2]
screen.
Settings are saved even when the camera is turned off.
O
Settings are cleared and returned to their default values
P
when the camera is turned off.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• Set [File No.] to O (On) to continue the sequential numbering for the file
name even if a new folder is created. Refer to "Selecting the File Number
Setting" (p.200) for details.
• When [Reset] (p.196) of the [R Set-up 3] menu is performed, all Memory
settings return to the default values.
Default Setting
Flash Exposure Comp.
O
Focus Position
O
Digital Filter
O
HDR Capture
O
Playback Info Display
O
File No.
O
Function Default Setting
Memory Memory
Flash Mode Flash Mode
Drive Mode Drive Mode
White Balance White Balance
Custom Image Custom Image
Sensitivity Sensitivity
EV Compensation EV Compensation
Flash Exposure Comp. Flash Exposure Comp.
MENU
195
O
P
P
P
O
O
1 2
8