Setting The Lens Functions; Setting The Nd Filter - Pentax Q Operating Manual

Setting the Lens Functions

148
You can set the lens functions. Depending on the type of the lens
attached, available functions differ.

Setting the ND Filter

Sets whether to use the ND filter built-in to the lens.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [ND Filter],
5
and press the 4 button.
The [ND Filter] screen appears.
3
Use the four-way controller (45)
to select [Off] or [On], and press
the 4 button.
The camera returns to the control panel.
• You can also change the setting from the [A Rec. Mode 1] menu (p.65).
• This function is fixed to [Off] when an ND filter is not built in to the lens.
ND Filter ND Filter
Off Off
Cancel Cancel
MENU
OK OK
OK