Processing Images With Digital Filters - Pentax K-5 Operating Manual

Processing Images with Digital
Filters
You can edit captured images using digital filters.
The following filters are available.
Filter Name
Creates an image that looks
Toy Camera as though it was shot with a
toy camera.
Creates an image with the
Retro
look of an old photo.
High Enhances the contrast in
Contrast the image.
Creates an image that looks as
Sketch Filter
though it was drawn with a pencil.
Creates an image that looks
Water Color
as though it was painted.
Creates an image that looks as
Pastel
though it was drawn with a crayon.
Lessens the tone of the image
Posterization to create an image that looks
as though it was hand-drawn.
Blurs part of the image to
Miniature create a fake miniature
scene.
Base
Adjusts the parameters to
Parameter
create the desired image.
Adj
Creates a monochrome
Monochrome image such as a black-and-
white photo.
Effect
Shading Level: +1 to +3
Blur: +1 to +3
Tone Break: Red/Green/Blue/Yellow
Toning (B-A): 7 levels
Frame Composite: None/Thin/
Medium/Thick
+1 to +5
Contrast: Low/Medium/High
Scratch Effect: OFF/ON
Intensity: +1 to +3
Saturation: OFF/Low/Medium/High
Weak/Medium/Strong
+1 to +5
In-Focus Plane: -3 to +3
In-Focus Width: Narrow/Middle/Wide
In-Focus Plane Angle: Side/Vertical/
Positive Slope/Negative Slope
Blur: +1 to +3
Brightness: -8 to +8
Saturation: -3 to +3
Hue: -3 to +3
Contrast: -3 to +3
Sharpness: -3 to +3
Filter Effect: OFF/Red/Green/Blue/
Infrared Filter
Toning (B-A): 7 levels
Parameter
265
8