Changing The Exposure Mode - Pentax K-5 Operating Manual

100
Auto
On
Off
3
Press the 3 button.
The camera is ready to take a picture.
• Processing may take a while when shooting with Slow Shutter Speed NR set
to [On]. Pictures cannot be taken while an image is being processed.
• When the Noise Reduction function is activated, [nr] blinks on the LCD panel
4
and in the viewfinder where the aperture value is normally displayed, and a
countdown of processing time is displayed where the shutter speed is
normally displayed.

Changing the Exposure Mode

This camera features the following nine exposure modes. Use the mode
dial to change the exposure mode. (p.45)
The settings available for each exposure mode are as follows.
(z: Available ×: Not available)
Exposure
Mode
B Lets you capture images
Green with fully automatic settings.
Automatically sets the
shutter speed and aperture
value to obtain a proper
exposure according to
e
Hyper- Program Line when taking
program pictures. You can use the
front and rear e-dials to
switch between shutter
priority and aperture priority.
Determines conditions such as shutter speed, sensitivity, and
internal temperature, and automatically applies Noise
Reduction as necessary. (default setting)
Applies Noise Reduction when the exposure time is longer than 1
second.
Does not apply Noise Reduction.
Characteristics
EV Change Change
Compen- Shutter Aperture
sation Speed Value
× ×
z z
Change
Page
Sensi-
tivity
× × p.103
p.104
z z