Pentax K-5 Operating Manual page 150

148
• By default, you cannot adjust the focus with the remote control unit. Focus on
the subject first with the camera before operating with the remote control.
When [18. AF with Remote Control] is set to [On] in the [A Custom Setting 3]
menu (p.92), you can use the remote control unit to adjust the focus. (AF
cannot be used with the remote control unit during Live View.)
• When using the Remote Control Waterproof O-RC1, AF can be operated with
the S button. The { button cannot be used.
• Select a mode other than h, i or i in the [Drive Mode] screen to cancel
the Remote Control shooting. The setting is canceled when the camera is
turned off if [Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec.
Mode 5] menu.
• The Shake Reduction function is automatically turned off when h, i or i
is set.
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.121) or attach the provided ME viewfinder cap. The light entering
4
the viewfinder has no effect on the exposure when the exposure mode is set
to a (Manual).
• The remote control may not operate in backlit conditions.
• The Remote Control F can send a remote control signal about 30,000 times.
Contact a PENTAX Service Center to replace the battery (this will involve a
fee).
Removing the Eyecup F Attaching the
R
ME Viewfinder cap