Setting The Image Finishing Tone (Custom Image) - Pentax K-7 Operating Manual

Setting the Image Finishing Tone
(Custom Image)
You can set the image finishing tone before shooting. Select from the
following seven modes for [Image Tone]: Bright (default setting), Natural,
Portrait, Landscape, Vibrant, Muted and Monochrome. You can adjust the
following items for [Image Tone].
Item
*1
Saturation
*1
Hue
High/Low Key Adj
Contrast
*2
Sharpness
*3
Filter Effect
*3
Toning
*1 This can be set when any mode other than [Monochrome] is selected.
*2 You can also change the setting to [Fine Sharpness], which makes image outlines even
thinner and sharper.
*3 This can be set when [Monochrome] is selected.
Custom Image cannot be set when the mode dial is set to B (Green) or C
(Movie) mode.
1
Press the four-way controller (5) in Capture mode.
The Custom Image options screen appears.
After the power is turned on, the last image taken is displayed in the
background.
Sets the color saturation. (Available settings: -4 to +4)
Sets the color. (Available settings: -4 to +4)
Changes the brightness of the image. (Available settings: -4
to +4)
Sets the image contrast. (Available settings: -4 to +4)
You can also change the setting to Contrast Highlight
Adjustment or Contrast Shadow Adjustment.
Sets the sharpness of the image outlines. (Available settings:
-4 to +4)
Changes the contrast to appear as if a B&W color filter was
used. Sets the filter color. (Available settings: [None],
[Green], [Yellow], [Orange], [Red], [Magenta], [Blue], [Cyan],
[Infrared Filter])
Sets the level for cold tone adjustment (- direction) and warm
tone adjustment (+ direction). (Available settings: -4 to +4)
Settings
205
6