On-Hook Dialing; Off-Hook Dialing (Voice Mode Transmission); Job Build - Panasonic Panafax UF-6950 Facsimile Manual

On-Hook Dialing

1

Off-Hook Dialing (Voice Mode Transmission)

1
If you wish to send the
document after talking with
the other party first, use
Voice Mode Transmission.
Your machine requires the
optional telephone handset,
or an external telephone.

Job Build

If the total document number of the job that you wish to send exceeds the maximum capacity of the ADF of 100 sheets
(20 lb), change the setting of the Fax Parameter No. 133 (Job Build) to "On" in advance. (See page 113; the Example
below, and Notes 4 and 5.)
You can also scan the documents manually one at a time.
Ex: (one 150-sheet job is split into 2 scan jobs)
1
Documents: 100 sheets <1st scan>
101
150
Documents: Remaining 50 sheets <2nd scan>
NOTE
46
Facsimile Features
Sending Documents
2
You will hear the dial tone through
the monitor speaker.
2
100
1st and 2nd Scanning Data
is combined into one job
1. If you need to dial a prefix to get an outside line, dial it first, then press
pause (represented by a "-") before dialing the full number.
Ex: 9
PAUSE
Or use "Dial Prefix" function to automatically add the prefix (see page 86).
2. If you are using Pulse dialing, and you wish to change to Tone dialing in the middle of dialing,
press
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9
PAUSE
MONITOR
3
Telephone Number
1
150
150-sheet is sent at
one time (Max: 255-sheet)
5551234
(represented by a "/").
5551234
TONE
3
* DIALING *
5551234
Your machine starts to dial
the telephone number.
4
When you hear the voice
of the other party, tell the
other party to prepare to
receive a document.
1
5
After the remaining documents
are scanned,"ANOTHER
ORIGINAL?" will display,
select "2:NO" to start sending.
PAUSE
to enter a