Panasonic Panafax UF-6950 Facsimile Manual page 135

Info.
Code
434 Communication error occurred while receiving.
436/490 Received data has too many errors.
459 Communication error occurred while receiving.
494 Communication error occurred while receiving.
495 Telephone line disconnected.
501/502/ Communication error occurred using the internal V.34
503/504 Modem.
505 Polling trasnmission error.
540/541/ Communication error occurred while transmitting.
542/543
550 Telephone line disconnected.
554/555 Communication error occurred while receiving.
580 Sub-address transmission to a machine that has no
Sub-address function.
623 No document loaded on the ADF.
630 Redial was not successful due to a busy line.
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
870 Memory overflow occurred while storing documents
into memory for transmission.
NOTE
1. After identifying the problem, and taking the recommended action, if the Information Codes
keep reoccuring or Information Codes that appear on your machine but are not listed above,
please contact your local Panasonic Authorized Dealer.
Meaning Possible Action
Check with the other party.
Check with the other party.
Check with the other party.
Check with the other party.
Check with the other party.
Check with the other party.
1. Check with the other party.
2. Check the polling setting.
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
1. Transmit documents without storing them
into memory first. Use Direct Transmission
when using G3 Fax Communication.
2. Install Optional Memory (SD Memory
Card).
Page
--
--
--
--
--
--
--
--
--
--
62
--
--
--
--
42
140
135