Panasonic Panafax UF-6950 Facsimile Manual page 125

Explanation of Contents
(1) Indication of Communication
Mode
(2) Start Time of Communication
(3) End Time of Communication
(4) File Number
(5) Station Number
(6) Communication Result
(7) One-Touch/Abbreviated
Number or Symbol
(8) Recorded Name in the Auto
Dialer, Direct Dialing Number, or
Email Address
(9) Number of Pages Transmitted
(10) Duration of Communication
: 001 to 999 (When the communication is stored into memory, a file number is
assigned for each communication.)
: Sequential number of the Stations.
: "OK" indicates that the communication was successful.
"M-OK" indicates that memory reception was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that
STOP
"P-OK" indicates that memory overflow occurred while storing the documents
into memory for transmission but successfully stored document(s) was sent.
"R-OK" indicates that the Relayed XMT was successful.
"B-OK" indicates that the Batch Transmission was successful.
"- -" indicates LAN transmission.
"3-digit Info Code" (see page 134) indicates that the communication has
failed. In this case, the machine will print the attached report with first page of
your document as shown on the previous page.
: mark indicates dialed by direct number dialing.
: The 3-digit number is the number of pages successfully transmitted.
When the documents are stored into memory, two 3-digit numbers will
appear.
The first 3-digit number represents the number of pages successfully
transmitted.
The second 3-digit number represents the total number of pages that were
attempted to be transmitted.
was pressed during communication.
125