Panasonic Panafax UF-6950 Facsimile Manual page 110

Fax Parameter Table
No.
001
002
004
005
006 DIALING METHOD
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
010 KEY/BUZZER VOLUME
012 COMM. JOURNAL
013 AUTO JOURNAL PRINT
014 FILE ACCEPTANCE
017 RECEIVE MODE
022 SUBSTITUTE RECEIVE
023 REC. PAPER SIZE
110
Setting Your Machine
Fax Parameters
Setting
Parameter
Number
CONTRAST
(HOME)
RESOLUTION
(HOME)
STAMP
(HOME)
MEMORY
(HOME)
REPORT
Setting
1 Lightest Setting the home position for the CONTRAST.
2 Lighter
*3 Normal
4 Darker
5 Darkest
*1 Standard Setting the home position for the RESOLUTION.
2 Fine
3 S-Fine
4 600dpi
5 Halftone
(Fine)
6 Halftone
(S-Fine)
7 Halftone
(600dpi)
*1 Off Setting the home position for the STAMP.
To select the stamp function when document is stored
2 On
in memory, see Fax Parameter No. 28.
1 Off Setting the home position for the MEMORY.
*2 On
1 Pulse Selecting the dialing method.
*2 Tone
*1 Inside Selecting the printing position of the header.
Inside
2 Outside
Outside : Outside TX copy area.
3 No print
No print : Header is not printed.
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid Selecting whether the machine prints the received date
& time, remote ID, percentage of reduction and page
2 Valid
number on the bottom of each received document.
1 Off Selecting the key touch beep sound.
*2 Soft
3 Loud
1 Off Selecting the home position of printout mode for
COMM. Journal Off/Always/Inc. only.
2 Always
Off
*3 Inc. Only
Always
Inc. Only : Prints only when communication has
1 Invalid Selecting whether the machine prints the journal
automatically after every 200 transactions.
*2 Valid
*1 Invalid Selecting whether the machine prints the file
acceptance journal.
2 Valid
If you set this parameter to valid, a journal will be
printed out after a new job is stored in the memory.
1 Manual Setting the reception mode to automatic or manual.
*2 Auto
1 Invalid Selecting whether the machine receives to memory
when the recording paper runs out, toner runs out or
*2 Valid
the recording paper is jammed.
(----) Selecting the Paper Tray and paper size.
(See page 118)
Comments
: Inside TX copy area.
: Does not print
: Always prints
failed.