Panasonic KX-HCM230 Operating Instructions Manual page 97

Wall Mounting
1) Mount the Flexible Stand firmly to a wall or beam using the three
screws (accessories). Set the Flexible Stand 165 mm (6.5 inches) away
from the ceiling.
• Use appropriate screws suited for the material of the wall.
2) Attach Network Camera by screwing the threaded mount into the tripod
mounting hole. A mounting hole on the rear side is also available.
3) Adjust the position of Network Camera and secure the Flexible Stand
firmly.
4) Roll up the cables and Flexible Stand with the Self Bonding tape
(accessories). Refer to page 92 for waterproofing the cables.
1)
165 mm
(6.5 inches)
3)
[For assistance, please call: 1-800-272-7033]
2)
Caulk around Flexible
Stand if necessary.
4)
Waterproof the rest
of the cable.
Self Bonding tape
Operating Instructions
97