Troubleshooting - Panasonic KX-HCM230 Operating Instructions Manual

Operating Instructions

5.4 Troubleshooting

Problem
When Setup
CD-ROM
cannot find
Network
Camera.
When Setup
program fails to
save the
network
parameters.
116
About Network Camera Setup
• Reconnect the AC adaptor if installation is not completed within
20 minutes.
• Do not connect Network Camera over a broadband router.
Setup program cannot detect Network Camera.
• If IP address is not assigned to the PC, setup program cannot
find Network Camera. Confirm that IP address is assigned to
the PC in the way shown on page 23. IP address of the PC can
be assigned on TCP/IP Properties window to access through
the steps in the TCP/IP Properties Table on page 24.
• Confirm that the Network Configuration from setup program is
enabled on Network window on page 54.
• When you set up Network Camera in [Type 3], connect
temporarily Network Camera in [Type 1], [Type 2] or [Type 4].
• Antivirus software on the PC may interfere with the setup
program. Disable the firewall of the antivirus software only
when setting up Network Camera.
• Reconnect the AC adaptor if installation is not completed within
20 minutes.
• Network may have the trouble. Confirm the parameters and the
connections of Network Camera through page 18—page 31.
Cause and Remedy